© ITE TECH. INC. ALL RIGHTS RESERVED.

MULTICAST SOLUTION

  • COFDM Technology

  • Transmission distance: at least 5km

  • Frequency: sub-1GHz or 2.4GHz

  • TX: IT9517 DVB-T modulator

    • Supports USB & TS/I2C/SPI interface

    • Supports Linux driver for USB interface

  • Integrated RF Front-end

    • Integrated local oscillator and RF mixer with frequency tuning range 50MHz ~ 950MHz.

    • RF output with integrated DAC and anti-aliasing filter

    • Integrated auto switching transmitter and receiver.

  • RX: IT9137 DVB-T demodulator

    • Supports USB & TS/I2C interface 

    • Supports Linux and Android driver for USB interface

  • Low latency < 300ms

General Features

ITE's multicast WMS solution is based on the digital TV (DTV) broadcasting technology. The technology support both wired and wireless transmission. After TV's analog switch off (ASO), countries worldwide have adopted their own digital TV standards. Among them, DVB-T and ISDB-T are the most popular. The two standards are also what ITE's IC supports. 

The DTV standards are by nature developed for digital audio and video transmission. They bring many benefits when used in WMS. For example, the video is compressed before transmission, which greatly reduces the data rate such that HD or UHD (1080p30, 1080p60, 4K, and so on) digital video signals can be sent over a 6-8 MHz bandwidth. The advanced digital transmission technology such as scrambler, interleaver, error correction, and so on, allows long-distance transmission over the air. The transmission distance can be tens of kilometers and is mainly limited by the power of the power amplifier can output.

ITE's multicast WMS solution is well-proven in the field. Read the stories in the "blog" section for more information.

Sub-1GHz TX system diagram.

Sub-1GHz RX system diagram.

System Diagram - Sub-1GHz

  • IT951X modulator

  • IT913X demodulator

ITE's ICs

2.4GHz TX system diagram

2.4GHz RX system diagram

System Diagram - 2.4GHz

  • IT951X modulator

  • IT913X demodulator

  • IT9103 up/down converter (for 2.4GHz operation)

ITE's ICs